How to Refinish Your Bathtub

Bathtub refinishing is an efficient way to refurbish bathtubs. The technology behind the work is very similar to auto body shop technology. It includes the application of coating, normally an ep-acrylic material or an acrylic urethane.

The product is applied using high volume, low pressure spray and most re-finishers then go with a primer and a topcoat. Preparation work includes removing dirt the surface with industrial cleaners and removing caulk (around bathtubs). Additionally a bonding agent or an etch product is used on tubs to create better adhesion. Curing times vary depending on the product used. It may be 3 hours to a week until using your bathtub again. All products themselves are effective. If the prep work is done well, the solution will be very long lasting. It takes about 3-4 hours to refinish a bathtub.

However, refinishing work may not be confused with a brand new job. Trustworthy re-finisher offer not less than five years of warranty. On average, expect to have to redo it in 10-15 years. The appearance of refinishing work can be very similar. It is, however, always a coating. The original enamel on your tub was applied at a factory, in a kiln at several hundred degrees. This is not something that can be emulated in the field.

When should I consider refinishing?

Tub refinishing is a money saving option to replacement when replacing the tub becomes prohibitive. In many cases you are not equipped to tear out the entire bath. Bathtub refinishing is a good solution for color changes on bathtubs. It is a quick way to change the color of an outdated tub, not a bad product.

How much would it cost for tub refinishing?

The rate for a good work on a tub is around $300-400. Cost can vary depending on the market you live in. It is important to select a reliable re-finisher. Like everything else, you always get what you pay for with refinishing. An inexperienced re-finisher can spill chemical on the hardwood floor. Remember, if the tub peels and you cannot find the person who did the work, you will be suffer more costs.

Which re-finisher shall I choose?

Many re-finishers use unethical marketing gimmicks to name their process. All re-finishers are working with primarily the same material. Find a reputable re-finisher in your area. Experience is the key here. Moreover,, there are differences on terms of how each approaches his work.

How Much Is Tree Removal (Including The Stump) Going To Cost You?

The size of the tree is going to be the biggest factor when it comes to how much removal is going to cost you. Hazardous conditions can come into play, too, and that can increase how much this project costs. Before you examine the average costs I’m about to give you and get your quote from a tree removal service, it’s important to know one other major factor.

Tree Removal And Stump Grinding Are Different

That factor is that tree removal and stump grinding or stump removal are two different services. A tree removal quote by itself is going to leave a stump sticking out of the ground. Now you can do some beautiful things with that stump if you want to make it part of your landscape. But if you want it gone, too, you’re going to have to choose between stump grinding and stump removal. Stump grinding can be inexpensive compared to the actual removal of the tree according to this article here.

Trees Have Large Root Systems Underground

Remember that trees have large root systems underground, and that is why stump grinding or removal can set you back some extra dough. To look at the costs, let’s begin by checking out the averages for removing just the tree and leaving the stump. The average cost is $500­$1000. You can expect that most trees are going to fall in that range, but the high end is $1500. The low end is $150, but that sounds like it would be one small tree.

Stump Grinding Costs …

Stump grinding can cost more than $200. Stump removal typically costs anywhere from $60 to $350. Keep that in mind as you reach out to contractors for quotes. Ask for quotes that include what you want to be done with the stump. Get all the costs figured out, and whatever the case may be, do not try to remove the tree yourself. You might have seen it done in movies or heard that other people have tried it, but it’s never a good idea, trust me.You’re always better off contacting a professional who can get it done without risking your own safety. Because of this, you can visit a google to start your search for a professional tree removal service.

Thanks to our friends at Tree Lopping Logan Co for giving us some insight on how to get look after your trees.

Tree Lopping Logan Co

34 Marday St
Slacks Creek, Qld 4127
(07) 2102 1267
https://goo.gl/maps/F2jw8BUXm1r
https://www.treeloppinglogan.com/